3 MB 100
METERS
UK
LTD
User Manual
Smart Energy Meter
s a l e s @ m e t e r s . c o . u k 0 1 5 2 4 5 5 5 9 2 9
INDEX
1. Safety notice
2. Package Contents
3. Technical Description
3.1 Product Description
3.2 Performance criteria
3.3 Meter specification
4. Dimensions
5. Wiring diagrams
6. Meter reading
7. Main features
7.1 Consumption Indicator
7.2 Reading the Meter
7.3 Pulse Output
7.4 Far Infrared Interface
7.4 Communication Port
8 Programming
8.1 Password verify
8.2 CT Rate setting
8.3 Baud rate setting
8.4 ID/Address Setting
9. Technical support
3. TECHNICAL DESCRIPTION
3 MB 100 • Direct Connection • M-Bus • Pulse output
D Y N A M i T E
Smart
Link
KEY FEATURES
• Three Phase metering
• Standard DIN rail format (DIN43880)
• CI.1 Accuracy EN50470
• LCD display, 6 integer 1 decimal
• Large display LCD
• Smart communication port, M-Bus output
• Isolate pulse output and IR (DIN43864)
• Direct metering up to 100A
• M-bus communication
• Front Panel Programming
• Memory back-up (EEprom)
• 7 DIN module size
METERS
UK
LTD
1. SAFETY NOTICE
The smart energy meter 3 MB 100 does not require special mechanical
or electrical tools for its installation. Mounting position (with any angle of tilt)
has no effect on the measurement functions of the meter.
Connection of the meter must follow the wiring diagram.
Incorrect connection of the meter to the electricity network will cause a major
display problem and can also cause serious damage to the meter.
Before connecting the meter, ensure the local conditions of the energy supply
is consistent with the information under the model number of the meter.
Preferably use shielded cables. Make sure that all connection cables are
not damaged during the installation of the meter and not energized or showing
any non-mechanical stress.
Repairs to the meter are to be made by a qualified electrician only.
PLEASE NOTE: The capacitors in the meter may still be charged after the meter
is disconnected for all power.
2. PACKAGE CONTENTS
Three phase, electronic energy meter
Instructions for assembly; ID setting; Baud rate setting;
Password setting
