9
uncontrolled restarting.
• When working stone, use dust extraction.
The vacuum cleaner must be approved for
the extraction of stone dust.
Using this
equipment reduces dust-related hazards.
• Use a cutting guide when cutting stone.
Without sideward guidance, the cutting disc
can jam and cause kickback.
• When working with the machine, always
hold it firmly with both hands and provide
for a secure stance.
The power tool is guided
more secure with both hands.
• Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
• Keep your workplace clean. Blends of
materials are particularly dangerous.
Dust from
light alloys can burn or explode.
• Never use the machine with a damaged cable.
Do not touch the damaged cable and
pull the mains plug when the cable is damaged
while working.
Damaged cables increase
the risk of an electric shock.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
5. Description of symbols
Pay attention to all the signs and symbols shown
in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
