ITCR Base Radio User's Guide
© 2011 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential
6
Do Not Distribute
9/8/2011
2.6
Equipment Modifications
Caution:
Any changes or modifications to this equipment not
expressly approved by the party responsible for compliance (in
the respective country of use) could void the user’s authority to
operate the equipment.
3.
Setup and Configuration for the Base Radio
Set up physical connections with the following:
DC Power
Ethernet
RF output termination
The sections below identify each of the physical connections.
3.1
Input Power
A label on the radio chassis indicates the rated voltage of the base radio: 24 or 48V.
The table below describes the power supply requirements for each type.
Caution:
Applying an incorrect voltage outside the rated voltage
range of a Base radio can damage it. Confirm the voltage ratings
of the radio and the power supply before applying power.
