3
EDITING CHASES
:
This feature allows you to add / delete SCENES from an
already existing CHASE.
1)
Press and HOLD the
PROGRAM
Button down for three (3)
Seconds to enter the Programming Mode.
2)
Select the
CHASE
(1-6) to which you want to add a step.
3)
Press
TAPSYNC / Display
and the
LCD
shows the
SCENE
and the
BANK
. That is the
BANK
containing the
SCENE
you want to add to the
CHASE
.
4)
Press
TAPSYNC / Display
again and the LCD shows the
CHASE
that you have selected to add to.
5)
Use the
UP
or
DOWN
Buttons to scroll through the
CHASE
to reach the step
AFTER
which you wish to add.
6)
Press
MIDI / Add
– the
LCD
will read one step number
higher.
7)
Press the
SCENE
Button you wish to add.
8)
Press the
MIDI / Add
again to add the new step.
9)
Press and
HOLD
the
PROGRAM
Button down for three (3)
seconds to exit the Programming Mode.
3
DELETING A STEP OR TWO IN A CHASE:
1)
Press and HOLD the
PROGRAM
Button for three (3)
Seconds to enter the Programming Mode.
2)
Select the
CHASE
(1-6) from which you want to delete a
step (scene).
3)
Press
TAPSYNC / Display
and the
LCD
shows the
CHASE
you have selected.
4)
Use the
UP
and
Down
Buttons to scroll through the
CHASE
to reach the step (scene) you want to delete.
5)
Press
AUTO / Del
and the
SCENE
will be deleted.
6)
Press and HOLD the
PROGRAM
Button for three (3)
seconds to exit the Programming Mode.
3
DELETE CHASE ( all SCENES still available)
1)
Press and HOLD down the
BANK
Down
and
AUTO / Del.
while turning power off.
2)
Reconnect the Power and the
CHASES
should all be
deleted
(8)
3
RUNNING SCENES:
MANUAL RUN SCENES
1)
When the power is first turned on, the unit is in a
MANUAL
Scene mode.
2)
If in the
Program Mode
– Press and Hold the
PROGRAM
Button for three (3) seconds. The
Program LED
will go out.
The
SCENEMASTER
is now in its
MANAU
L Mode.
3)
Be Sure that the
AUTO
and
MUSIC
Button
LED’s
are off.
4)
Select the
BANK
– using the
UP
or
DOWN
Button that
stores the
SCENES
you want to run.
5)
Press the
SCENE
Button to run the
SCENE
you have
selected.
3
RUNNING SCENES:
AUTO RUN SCENES:
This function will run a BANK of
PROGRAMMED
SCENES
in a sequential loop.
1)
Press
AUTO / Del
once to activate the
AUTO RUN
mode.
2)
Use the
UP
or
DOWN BANK
Button to select a Bank of
SCENES
to run.
3)
Now you can use the
SPEED
and
FADE
sliders to adjust
the
SCENES
to your liking
NOTE:
The
FADE
setting should never be slower then the
SPEED
setting or the
SCENES
will not be completed.
4)
You can change the
BANKS “on the fly”
by pressing the
UP
or
DOWN BANK
Buttons.
3
RUNNING SCENES:
MUSIC RUN SCENES
1)
Press the
MUSIC / Bank-Copy
Button and the
Corresponding indicator light will come on in the
LCD.
2)
Select the desired
BANK
that stores the
SCENES
you
want to
CHASE
by using the
UP
or
DOWN
Button
3
RUNNING SCENES:
MIDI RUN SCENES
1)
Select
BANK
to run
SCENES
using MIDI – in
MANUAL /
Auto
or
MUSIC Run Mode.
