11
Initial operation:
Replace Wireless Outdoor Sensor battery compartment cover ,
Push the Channel selector switch in the battery
compartment of the Wireless Outdoor Sensor, set the correct channel ,Insert 2 x AA batteries observing polarity [
“+” and “–“ marks]
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, the Wireless
Outdoor Sensor began to switch to the normal working mode, to detect the temperature and humidity in the
environment .
At this time, the sensor will transmit 1 wireless signals, and the interval of about 1 minutes will
automatically transmit the 1 wireless signal, each transmitted 1 wireless signal emission sensor indicator will flash 1
times.
According to the appearance of the Base Station icon shows that the power adapter is inserted into the socket on
the Base Station, and the power adapter is connected to the power supply. After you pass on the power supply, all
the symbols on the display screen will be displayed after about 3 seconds, the base station began to switch to the
normal working mode, to detect the temperature, humidity and air pressure in the environment .
The Base Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3
minutes and is displayed by a flashing reception RF antenna symbol “ ” in the “OUTDOOR” display area on the
receiver.
the “OUTDOOR” display area will show an animation of the RF antenna symbol, indicating the base
station is searching for the signal from the outdoor sensor.
At the same time the base station began to establish
WIFI connections (details see the following WIFI connection description)
When the Base Station starts normal
，
Open the Base Station battery compartment cover
，
Insert 2 x AA batteries
observing polarity [ “+” and “-” marks]
，
The battery is a backup power supply of the Base Station, which can ensure
the normal operation of the base station after the power adapter is unexpectedly cut off.
Note: after the power adapter is disconnected, the WIFI connection of the base station will be automatically
disconnected.
Outdoor sensor transmission:
When the Base Station successfully receives signals from the wireless sensor, the temperature and humidity of the
OUTDOOR are displayed on the OUTDOOR column of the Base Station.
The base station can connect up to 3 channel wireless sensor registration, the use of multiple wireless sensor, the
wireless sensor channel can not choose the same channel at the same time (a total of 1, 2, 3 channel can choose)
Press the "
DOWN
" key can switch the display of different channels of outdoor temperature and humidity, when
displaying the symbol "
", will display the channel every 5 seconds automatically switch a channel
If the Base Station failed to receive transmission from outdoor sensor (“
- -
”display on the LCD), press and hold
“
DOWN
” button for 3 seconds to receive transmission manually. the outdoor temperature will show an animation of
the RF antenna symbol
，
the Base Station will re receive the wireless signal of the outdoor sensor.
Note: when the wireless sensor set up different channels, the base station "OUTDOOR" also want to switch to the
same channel.
When there is no wireless sensor signal transmission on the channel, "--" will be displayed in the
channel of the base station
Manual time setting:
Press “
MODE
”
button, can switch the display calendar or time/second or time/week
Dokument pobrany ze strony: sklep.e-szop.pl