Metek MX15, Installation Manual, Page: 27 / 33

Installation Manual - Rev C California Instruments
MX15 Series 23
BNC Description
1 Trigger Input (TTL input)
2 Trigger Output (TTL output) (Same signal connection as Function Strobe. Some units
may not have this output connected. If you don’t get an output trigger on this BNC, use
the Function Strobe BNC instead.)
3 Function Strobe (TTL output) (Same signal connection as Trigger Output)
4 Clock (TTL output on Master / TTL input on Auxiliary)
5 Lock (TTL output on Master / TTL input on Auxiliary)
2.7.4 External Sense Connector
Table 2-6: External Sense Connector
Pin Description
1 Phase A sense
2 N/C
3 N/C
4 Neutral sense