3
4
9
EN
10. Storage and transportation conditions
The compressor is dispatched by the manufacturer in a carton on a
non-returnable pallet to protect the appliance from damage during
transportation. Wherever possible, the original packaging should always
be used for transportation. Therefore it is advised to keep the original
packaging.
During transportation the compressor must be protected from moisture,
dirt and extreme temperatures. The packaged compressors must be stored
in a dry place to protect it from humidity (max. relative air humidity:
70%). Storage temperature must be between -10°C and +40°C.
The compressor may only be transported unpressurised.
Before it is transported, it is essential that the compressed
air from the pressure tank and pressure hoses is released
and any condensate water is drained off.
11. Installation guidelines
Unpack the compressor and check carefully to ensure that it is in perfect
condition. Assemble the support legs as supplied
3
. The compressor
may only be installed and operated in a dry, well-ventilated and low-dust
location. If there is insufficient air flow, a suction device or ventilator of
the correct dimensions must be installed. The ambient temperature must
be b5°C and +40°C.
The motor fan ensures that the power unit is force-cooled effectively.
However, for this to happen, the air must be able to flow in and out without
obstructions. If this is not the case, a separate ventilation system must be
installed
4
.
The compressor must be installed in such a way that it is easily accessible
for operation and maintenance. The compressor must be placed on a
level floor which is sufficiently robust. The compressor must not touch
any other objects due to heat development. It is not necessary to provide
a special foundation or base. The compressor may simply be placed on
a level floor. If the compressor is fitted in a mounting bracket, then the
mounting bracket should not be secured to the ground. It is recommended
to attach four vibration dampers.
Storage and transportation conditions
Installation guidelines
Practice personnel, technicians
