SWD222 -
INSTRUCTIONS
Assembly instructions for sit-stand desktop workstation
with mounting for two monitors
Page 1: ...SWD222 INSTRUCTIONS Assembly instructions for sit stand desktop workstation with mounting for two monitors ...
Page 2: ...y is complete 1 Attach the vertical column A to the base B using screws I and the tool provided M I 2 Attach the keyboard tray C using screws H and the tool provided M H C D G L J K 3 Attach the monitor rail D to the bracket using parts G J and K with the supplied tool L 4 Fit VESA plates E to the back of your monitors using the screws provided F and then slot each monitor on to the arm F E ...
Page 3: ...ack in Monitor height can be freely adjusted using the loop handle If the monitors are very light or very heavy and the spring does not balance the weight of the monitors there is a friction adjustment Align the hole in the column with the monitor rail bracket and adjust the screw with the hex key provided 7 Cable Management figure 1 figure 3 figure 2 Route the cables through the cable clips up th...
Page 4: ...m Hex Key Item Parts List Keep the area under the keyboard tray clear Do not stand behind the column during adjustment Do not lean on the keyboard tray Maximum equipment load 6kg inc keyboard and mouse etc Leave sufficient clearance behind the i stand to prevent hitting the wall at the highest setting ...
