156 Burton Street
●
Painesville
, Ohio
●
USA
●
1.800.989.DOCKS (3625)
440.286.7135
●
Fax: 440.286.7134
●
●
www.metalcraftdocks.com
Note how the following
Mounting Kit
parts are oriented in illustration to the right. The angle is
mounted underneath the Dock Module and sandwiches the deck slats between the angle and the
Bench:
1. Mounting Bench Parallel to Deck Module
This is the most popular mount.
Locate the Bench in the desired position. No holes need to be drilled -- insert the Stainless bolts
through the 1/4” spaces between the deck slats. Use a large screwdriver to separate the deck slats
enough to let the bolt drop into position without scraping the non-skid finish.
Place the two angles into position and attach the flat washers and lock nuts. The holes in the angle
are offset to permit mounting the Bench in various positions.
Tighten lock nut firmly to ensure the bench is solid and won’t move.
