Metal Samples MS3600E, Operator'S Manual, Page: 21 / 52

17
2. MEASURE PROBE
Select a probe before you run the function
To run ‘MAKE MEASUREMENT’ you must select a probe
from memory first. See ‘ SELECT PROBE’ from the Main
menu.
To make a measurement manually, select ‘MEASURE
PROBE’ in the Main Menu. Ensure that the probe
connected to the data logger is selected as the active
probe before using this function. The display changes as
below and the data logger measures the probe. The
probe ID, probe type, and probe life of the current
measuring probe is displayed at the bottom of the
screen.
2. MEASUREMENT
Measuring . . .
ID: 9991
TYPE: WIRE
PL:10.00
^: Measure