background image

28

OPERATING INSTRUCTIONS MANUAL - T739 FARMING TRUCK TRAILER

WARRANTY CONDITIONS

12.  WARRANTY CONDITIONS

1.  The manufacturer provides a trailer designed and built in 

compliance with the current standards. The manufacturer 

guarantees that the supplied trailer is free of manufacturing 

defects.

2.  Metal-Fach Sp. z o.o. provides 12–month warranty service for the 

trailer starting from the date of first sale, provided the trailer is 

used for its intended purpose and the recommendations contained 

in the manual are followed.

3.  The warranty card properly filled in at the Outlet is the confirmation 

of the manufacturer's warranty; the acceptance of the warranty 

conditions must be confirmed with the customer's signature.

4.  The quality warranty covers the machine defects caused by 

defective manufacturing, material defects and latent defects.

5.  The warranty does not cover the assemblies and parts which are 

subject to normal wear and tear.

6.  The warranty does not cover any mechanical damage or other 

damage resulting from improper use, improper maintenance or 

improper adjustment of the trailer.

7.  The warranty does not cover any damage resulting from improper 

storage of the machine.

8.  Any unauthorised modifications in the construction of the machine 

introduced by the user will result in automatic termination of the 

warranty.

9.  The manufacturer shall not be held responsible for loss, damage 

or destruction of the product resulting from causes other than 

defects of the supplied machine.

10.  During the warranty period the manufacturer will repair any defects 

which occurred as a result of the manufacturer's negligence.

11.  The warranty repair shall be made within 14 working days of the 

notification/supply of the trailer to the designated service station 

or at another time agreed upon by the parties.

12. The warranty is extended by the time required to complete the 

repair.

13. All repairs which are not covered by the warranty performed by 

authorised service stations are made at a full cost payable by the 

user. Before such repairs, the service station will inform the user 

of the suggested cost, time and scope of the repair.

14.  The Customer makes the decision whether to commence a payable 

repair of the trailer with a warranty valid at the time of repair.

Current information about the products is 

available atwww.metalfach.com.pl

ATTENTION!

Summary of Contents for T739

































Reviews: