Metal Defender MD-6, User Manual

Page: 14 / 21

14
How to Change Your Password
You may want to change your password from the standard 1234 or may find yourself with an
error code of E000 when debugging. No worries, the instructions below will show you how to
change the password.
Changing without E000 code
The unit comes with the standard 1234 as a password. During the debugging process, that will
popup automatically, but if you like to change, hit the enter button.
You will notice that the warning times will read: 0000. This means that the password was
correct. To change this password, use the SELECT button to adjust the number for each of the
places, and use the SETUP button to switch each place. If you want your password to be 4765
– use the select button until you reached 4, and the setup button will switch to the next
position. Use the select button until you reach 7 and continue the process
When you have the password you want, hit the ENTER button until it cycles through past the
zone sensitivities. When this is done, the control panel will reset and that would be the new
password that must be entered from now on.
Changing with the E000 code
When you get the E000 code when debugging, that means that you entered in the wrong
password. To bypass this code and change the password, use the SELECT button to adjust the
number for each of the places, and use the SETUP button to switch each place so that you
have 8888. When finished press ENTER.
8888 is the bypass password that will allow you to change the password to whatever you wish.
Once you insert 8888 into the password and press ENTER, the warning times will read: 0000.
To change this password, use the SELECT button to adjust the number for each of the places,
and use the SETUP button to switch each place. If you want your password to be 4765
– use
the select button until you reached 4, and the setup button will switch to the next position.
Use the select button until you reached 7, and continue the process.
When you have the password you want, hit the ENTER button until it cycles through past the
zone sensitivities. When this is done, the control panel will reset and that would be the new
password that must be entered from now on.