4.Bluetooth
After the meter is powered on, Bluetooth can be connected in the standby
interface, and the other interfaces are not connected to the Bluetooth.
Scan the QR code on the device, download the app (e-Health); open the Bluetooth
on the phone after installation, then open the Bluetooth app (e-health), select the
corresponding model (such as bike or elliptical machine) and then select in the next
interface Bluetooth to be connected (the console will display the Bluetooth address
when it is powered on). After the Bluetooth is connected, the user can pretty much
operate the bike with the phone and the display can start, pause, stop, etc. At the
same time, the exercise time, calories, distance, RPM, heart rate and other data can
be synchronized on the app and stored by day to track exercise. When you exit
Bluetooth, the meter will return to the standby screen.
Maintenance schedule
The safety of the equipment can be maintained only if the equipment is examined
regularly for damage or wear. If maintenance is required, keep the equipment out of
use until defective parts are repaired or replaced. Pay special attention to parts that
are subject to wear as outlined in the Preventive Maintenance Schedule.
•
Inspect pedals, pedal arms and pedal straps for wear and tear and tighten if
necessary. Pay special attention to corrosion build-up in the pedal connection
to the pedal arm, clean or replace if necessary.
•
Pedal the bike at full resistance to check if the drive belts are slipping and that
the clutch is engaging without making any noise during the pedalling.
•
Check that the console is clean of salt residue from sweat and check all
functions to make sure all buttons work, longer finger nails can damage the
membrane. Check contact heart rate function. Console should be cleaned after
every workout with a damp cloth with water and or antibacterial neutral solution.
•
Check tightness on the bolts console, front post and that the bike is levelled.
Manufactured for Metagenics Fitness Inc. www.metagenics.ca
