Using the 1.2mm set screw Allen wrench, loosen the set screw locking the groove mount to the
heatsink and unthread the groove mount so that the top of the heatsink is accessible.
Reinstall the groove mount and
tighten down the locking set screw.
Step 3
Wire Length Shortened
Step 1
Insert the provided 3mm x 4mm PTFE
tube into the top of the heatsink with the
chamfered end first. Trim the tube so that its
flush with the top.
IMPORTANT NOTES
- Sizing of parts may vary across illustrations to enhance relevant details.
- Wiring length is not reflective of the actual wire length and is shortened for simplicity.
-
Previous assembly steps may not be visible for each stage of setup.
Wire Length Cutoff Connected Terminals
Step 2
