7
Assembly manual FS2 EI60/120 Version 11, jan.. 2021
5. Commissioning/assembly.
Before starting to assembly of the fire-retardant roller screen, you must check the following:
-
Check all components by use of the delivery note/order document;
-
Check the dimensioning (see delivery note/order confirmation), i.e. structural width and
total width, structural height and total height.
5.1 Essential “tools” for assembly
Please find below a list that includes a number of tools:
-
Drill hammer with different drills (depending on subsurface, e.g. stone or metal);
-
Extension cable;
-
Motor adjusting cable;
-
Fastening materials for the assembly of the guides on the façade/wand;
-
Means to neatly conceal or attach the cable of the motor and the peripheral equipment;
-
Stepladder, platform or ladder;
-
During the assembly of a wide or high fire-retardant roller screen, make use of hoisting or lifting
installations, in connection with the Health & Safety legislation;
-
Standard tools;
-
Possibly, this list is not exhaustive in your opinion. This overview however, is but a mere
indication of the type of tools that could be used..
5.2 Check on the operating area
Before you can start the assembly of the fire-retardant roller screen, you must first check the following:
-
Check whether the electrical connections are present;
-
Check whether the voltage corresponds with what is stated in the order confirmation;
-
Check whether the (structural) width and the (structural) height correspond with the details in
the order confirmation;
-
Check whether there are obstacles in the area where the fire-retardant roller screen will be
placed;
-
Check whether there is sufficient room for the installation of the control;
-
Check whether the walls are “absolutely” vertical.
Activities on the electrical equipment of the machine may only be performed by electro-technical expert
personnel and only in voltage-free conditions (disconnected main switch, interrupted power supply), in
accordance with the electrical regulations.
All activities regarding the industrial door, such as maintenance and repair activities, as well as checks, may
only be performed during interrupted operation.
Before activating/commissioning the industrial door, you must guarantee that no one can be endangered as
a consequence of operating the industrial door.
5.3 Assembly sequence
Once paragraph 5.2 has been completed, one can start the assembly of the fire-retardant roller screen.
The assembly is subdivided in the following steps:
