Metabo XciteRC, Manual

Page: 23 / 52

23 Metabo Quadcopter
EN
Troubleshooting
·
Repairs
Troubleshooting
Problem Possible Cause Corrective Action
Rotor don‘t move ON/OFF switch is OFF
Weak Quadrocopter battery
Transmitter - model not bound Switch ON Quadrocopter
Re-charge battery
Rebind: first switch on the model, then the
transmitter
Rotor stops sud-
denly, Quadrocop-
ter chrashes Weak Quadrocopter battery
Weak transmitter battery Re-charge battery
Change transmitter batteries
The Quadrocopter
does not react to
the remote control.
Loss of control. Gyro initialisation failure
Quadcopter not bound to the trans-
mitter
Gyro calibration failure after a crash
Place the model on a flat surface when
switching on
Re-bind: switch on the quadcopter first,
then the transmitter
Re-calibrate the gyro, see section: Get-
ting Started, gyro calibration
The Quadrocopter
flies uncontrollably Gyro calibration failure after a crash Re-calibrate the gyro, see section Getting
Started, gyro calibration
Repairs, Spare Parts
Normal wear and defective parts that result from an accident, are excluded from the guarantee. These in-
clude in particular:
For car models:
bald tires, worn parts and drive gears, or bent / broken suspension, chassis or bodywork
For ship models: damaged or broken propellers, torn superstructure
For airplanes: damage due to improper transportation or crash
I If you find a part that is defective in material or workmanship right after opening the package, return - before
you used it – to your dealer or directly to us and we will send you a replacement.
For the Metabo Quadcopter some parts are available as spares. If a part is defective or worn, you can identify
it with the help of the online spare parts list.
In case of problems or questions, please contact your dealer or:
XciteRC Modellbau GmbH & Co. KG - Service, Autenbachstrasse 12, D-73035 Göppingen, Phone +49 7161
40 799 50
Email: service@xciterc.de
Spare parts for the Metabo Quadcopter you may order in your local hobby shop or online at http://www.
XciteRC.com/