Metabo STA 18 LTX, Original Instructions Manual

Page: 12 / 68

ENGLISH en
12
equipment and its implementation in national legal
systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U
=Voltage of battery pack
T
1
=Maximum material thickness in wood
T
2
=Maximum material thickness in non-
ferrous metals
T
3
=Maximum material thickness in sheet
steel
n
0
=Stroke rate at idle speed
m =Weight with smallest battery pack
Measured values determined in conformity with
EN 60745.
Machine in protection class II
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user e.g. organisational
measures based on the adjusted estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a
h,CM
=Vibration emission value
(Sawing sheet metal)
a
h,CW
=Vibration emission value
(Sawing wood)
K
h,...
= Uncertainty (vibration)
Typical A-effective perceived sound levels:
L
pA
=sound-pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
=Uncertainty
Wear ear protectors!
13. Technical Specifications