Metabo PowerMaxx ULA 12 LED, Original Instructions Manual

Page: 7 / 36

ENGLISH en
7
Do not look into the lamp during longer operation.
Could cause damage to the eyes.
See image on the title page.
1 Window/outlet of LED beam
2 Lamp head
3 On/off switch
4 Battery pack release button
5 Battery pack*
* depending on model
Insert a fully charged battery pack (5) (taking into
account the particular model).
Turn on and off at the switch (3).
Do not direct the light beam into the eyes of
people or animals.
The ideal storage temperature for battery packs is
between 10°C and 30°C.
Depending on model: Tilt the lamp head (2) to
adjust the angle of the light beam.
Remove the battery pack from the device
before carrying out cleaning.
Do not clean with aggressive cleaning agents.
Ensure that the lamp and the battery contacts are
dry.
Repairs to Metabo machines must be carried
out by qualified electricians only!
If any of your Metabo power tools require repairs,
please contact your Metabo service centre. For
addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.
Do not allow battery packs to come into contact with
water!
To protect the environment, do not dispose of
power tools or battery packs in household
waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Before disposal, discharge the battery pack in the
tool. Prevent the contacts from short-circuiting (e. g.
by protecting them with adhesive tape).
To be used only with original Metabo battery packs:
18 V: 6.25589, 6.25596, 6.25578, 6.25594,
6.25343, 6.25591, 6.25592, 6.25342, 6.25341, etc.
14,4 V: 6.25588, 6.25595, 6.25590, etc.
12 V: 6.25406, 6.25349, etc.
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U
= voltage
(for 12 V battery pack:
max. voltage = 12 V,
nominal voltage = 10.8 V)
P = Power consumption
Phi = Lamp flux
CRI = Colour rendering index
CCT = Correlated colour temperature
m = Weight (without battery pack)
D = D=Collar diameter
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Metabowerke GmbH
Metabo-Allee 1, P.O. Box 1229, 72602 Nürtingen,
Germany
www.metabo.com
Changes due to technological progress reserved.
© by Metabo
2. Overview
3. Use
4. Cleaning
5. Repairs
6. Environmental Protection
7. Technical specifications