28
ENGLISH
The machine's packing can be 100%
recycled.
Worn out power tools and accessories
contain considerable amounts of valua-
ble raw and rubber materials, which can
be recycled.
These instructions are printed on paper
produced with elemental chlorine-free
bleaching process.
This section describes problems and
malfunctions which you should be able
to resolve yourself. If the measures
detailed here do not solve your problem,
see under "Repairs".
A
Danger!
Many accidents happen particularly
in connection with problems and
faults. Therefore please note:
•
Always unplug before servicing.
•
Check that all safety devices are
operational again after each fault
service.
Motor does not run
No mains voltage
•
Check cables, plug, outlet and
mains fuse.
No crosscut function
Transport locking pin engaged:
•
Pull transport locking pin out.
Safety lock engaged:
•
Actuate the safety lock.
Only little sawing performance
Saw blade blunt (possibly tempering
marks on blade body):
Saw blade not suitable for material being
cut (see chapter "Technical specifica-
tions");
Saw blade warped:
•
Replace saw blade (see chapter
"Maintenance").
Saw vibrates heavily
Saw blade warped:
•
Replace saw blade (see chapter
"Maintenance").
Saw blade incorrectly mounted:
•
Mount saw blade correctly (see
chapter "Maintenance").
Saw squeals when starting
Drive belt tension too low:
•
Retension the drive belt (see chap-
ter "Maintenance - Drive belt ten-
sioning").
Stiffness of rotating table
Saw dust build-up under rotating table:
•
Remove saw dust.
13. Environmental Protection
14. Trouble Shooting
15. Technical specifications
Voltage
V
230 (1
∼
50 Hz)
110 (1
∼
50 Hz)
Current draw
A
8.4
15.9
Fuse protection
A
10 (time-lag)
-
Motor capacity*(power input P1, S6 20% - 5 min)
kW
1.8
1.6
Protection class
IP
20
20
Degree of protection
II
II
Saw blade speed
min
-1
5020
5020
Cutting speed
m/s
66
66
Saw blade diameter (outer)
mm
250
250
Arbor bore
mm
30
30
Dimensions
Machine in packing
−
Length / width / height
Machine ready to work, rotating table in 90
°
position, c/w suction port
−
Length / width / height
mm
mm
800 / 600 / 450
575 / 900 / 595
800 / 600 / 450
575 / 900 / 595
Maximum workpiece cross section
Standard cross cuts
−
width / height
Mitre cuts (
rotating table
45
°
)
−
width / height
Bevel cutss (track arm holder 45
° left
)
−
width / height
Compound mitre cuts (
rotating table
45
°
/ sawhead 48
° left
)
−
width / height
mm
mm
mm
mm
300 / 81
210 / 81
300 / 50
210 / 45
300 / 81
210 / 81
300 / 50
210 / 45
Weight
Machine in packing
Machine ready to work
kg
kg
26
20
26
20
Permissible ambient temperature for operation
Permissible temperature for transport and storage
°
C
°
C
0 to + 40
0 to + 40
0 to + 40
0 to + 40
