Metabo HS 18 LTX 45, Original Instruction

Page: 10 / 68

ENGLISH en
10
Check quick stop:
Switch machine on briefly and then off again.
Have the machine repaired if braking time is clearly
lengthened.
7.1 Switch-on lock, switching on and off
(safety two-hand operation):
The switch-on lock (7) must be released to switch
on the machine.
Switch (8) locked
Switch (8) unlocked.
• Switching on: Press the switch (8) , press the
frame switch (5).
• Switching off: Release switch (5) or (8) . As long
as the switch (8)is pressed, the switch-on lock (7)
is not engaged.
Thanks to the Quick stop, the cutting blades come
to a standstill within 0.08 seconds.
Have the machine repaired if braking time is
clearly lengthened.
7.2 Cleaning the cutting blade
(after each use)
Before cleaning:
Switch off the machine. Remove battery pack
(10) from the machine.
Wear protective gloves.
Remove contamination, leaf debris etc.
(e.g. with a brush or cloth)
After cleaning: Treat cutting blade with Metabo
hedge trimmer care oil 6.30474 or Pump Spray
6.30475 (biologically degradable).
It is advisable to have blunt cutting blades
sharpened in a specialist workshop. Check cutting
blades regularly for damage and have them
repaired in a specialist workshop immediately if
necessary.
f
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
A Chargers: ASC 55, ASC 145, etc.
Order no.: 627044000ASC 55
Order no.: 627378000ASC 145
etc.
B Battery packs:
Order no.: 625367000 4.0 Ah (LiHD)
Order no.: 625368000 5.5 Ah (LiHD)
Order no.: 625369000 8.0 Ah (LiHD)
Order no.: 625549000 10.0 Ah (LiHD)
Order no.: 625596000 2.0 Ah (Li-Ion)
Order no.: 625591000 4.0 Ah (Li-Ion)
Order no.: 625592000 5.2 Ah (Li-Ion)
etc.
C Hedge trimmer care oil (biologically
degradable), can (1 litre)
Order no.: 630475000
D Hedge trimmer care oil (biologically
degradable), Pump Spray can (0.3 litre)
Order no.: 630474000
For a complete range of accessories, see
www.metabo.com or the catalogue.
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs must not be disposed of with regular
waste! Please return faulty or used battery packs to
your Metabo dealer!
Do not throw battery packs into water.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
U
=Voltage of battery pack
ø max. =maximum cutting thickness
L =Useful blade length
n
0
=number of cuts at idling speed
m =Weight with smallest battery pack
Measured values determined in conformity with EN
62841.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
direct current
7. Use
8. Maintenance
9. Accessories
10. Repairs
11. Environmental Protection
12. Technical Specifications