Metabo FME 737, Original Instructions Manual

Page: 10 / 88

10
ENGLISH
ENG
1 Conformity Declaration
2 Specified Conditions of Use
3 General Safety Information
4 Special Safety Information
5 Overview
6 Initial Operation
7 Use
8 Accessories
9 Repairs
10 Environmental Protection
11 Technical Specifications
We, being solely responsible, hereby declare that
this product conforms to the standards and
directives specified on page 2.
The machines are designed...
- ... for fine grinding work with abrasive points on
metal.
- ... for routing with end mill cutters on non-ferrous
metals, plastics, hardwood, etc.
Suitable for actuating an appropriate Metabo
flexible shaft.
Can be upgraded to a router using suitable original
Metabo accessories.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
WARNIN G – Reading the operating
instructions will reduce the risk of injury.
WARNIN G Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
Before using this power tool, carefully read
through and familiarise yourself with all the
enclosed safety information and the instructions.
Keep all enclosed documentation for future refer-
ence, and pass on your power tool only together
with this documentation.
4.1 Safety Warnings Common for G rinding,
Sanding, Wire Brushing, Polishing or
Abrasive Cutting-Off Operations:
a) This power tool is intended to function as a
grinder. Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/
or serious injury.
b) Operations such as sanding, wire brushing,
polishing or cutting-off are not recommended
to be performed with this power tool.
Opera-
tions for which the power tool was not designed
may create a hazard and cause personal injury.
c) Do not use accessories which are not
specifically designed and recommended by the
tool manufacturer.
Just because the accessory
can be attached to your power tool, it does not
assure safe operation.
d) The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
Accessories running faster than
their rated speed can break and fly apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool.
Incorrectly sized
accessories cannot be adequately guarded or
controlled.
f) The arbour size of wheels, flanges, backing
pads or any other accessory must properly fit
the spindle of the power tool.
Accessories with
arbour holes that do not match the mounting hard-
Original instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
1 Conformity Declaration
2 Specified Conditions of Use
3 G eneral Safety Information
4 Special Safety Information
17024673_1109 FME 737.book Seite 10 Montag, 16. November 2009 11:31 11