BEFORE USE
1. Setting up and checking the work environment
Check if the work environment is suitable by
following the precautions.
2. Mounting and dismounting the guard and
fi
lter
Before using the appliance, check that the
fi
lter
is securely mounted. (Fig. 3)
Guard
Knob
Knob
Filter
Filter
Knob
Guard
Dust case
Release button
Ribs (6pcs.)
Fig. 3
(1) Mounting
1
Match the outside diameter of the
fi
lter to
the inside diameter of the guard and insert
as far as the
fi
lter ring will go.
2
Match the shape of the guard (with the
fi
lter
attached) to the shape of the hole in the
dust case and insert as far as it will go (6
points).
(2) Dismounting
To dismount the guard and the
fi
lter, follow the
above procedures in reverse.
3. Attaching and removing the suction opening
Insert the suction opening into the suction port
of the appliance as required. (Fig. 4)
ASSEMBLY AND OPERATION
APPLICATIONS
○
Light-duty vacuuming of dry surfaces
REMOVAL AND INSTALLATION
METHOD OF BATTERY
○
How to install the battery.
Align the battery with the groove in cleaner
handle and slip it into place.
Always insert it all the way until it locks in place
with a little click, If not, it may accidentally fall
out of the cleaner, causing injury to you or
someone around you (Fig. 2).
○
How to remove the battery.
Withdraw battery from the cleaner handle while
pressing the latch (2 pcs) of the battery (Fig. 2).
Handle
Latch
Insert
Pull out
Push
Battery
(Optional accessory)
<R18DL>
Handle
Insert
Pull out
Push
Battery
(Optional accessory)
Latch
<R18DSL>
Fig. 2
CHARGING
For rechargeable batteries, please charge in
according to the handling instructions of the charger
which you are using.
9
English
000Book̲R18DL̲US.indb 9
000Book̲R18DL̲US.indb 9
2018/10/24 14:20:54
2018/10/24 14:20:54
