21
English
Blinks ;
Output suspended due to high
temperature. Remove the battery
from the tool and allow it to fully cool
down.
Blinks ;
Output suspended due to failure or
malfunction. The problem may be
the battery so please contact your
dealer.
NOTE
○
Remaining battery levels may vary between that
shown on the battery and that of a product with its own
battery level function.
○
Do not give a strong shock to the display panel or
break it. It may lead to a trouble.
OPERATIONAL CAUTIONS
Resting the unit after continuous work
(1) The power tool is equipped with a temperature
protection circuit to protect the motor.
Continuous work may cause the temperature of the
unit to rise, activating the temperature protection
circuit and automatically stopping operation.
If this happens, allow the power tool to cool before
resuming use.
(2) After use for continuous work, rest the unit for
15 minutes or so when replacing the battery. The
temperature of the motor, switch, etc., will rise if
the work is started again immediately after battery
replacement, eventually resulting in burnout.
ABOUT ERROR LAMP OF AC/DC ADAPTER
Table 6
Indications of the indicator lamp
Status
Power
Lamp
(GREEN)
Error lamp
(RED)
Indicates
Adapter
Before use
Blinks
Light o
ff
Plugged into power
source
Power on
Lights
Light o
ff
Tool can be used
Power
suspended
Blinks
Lights
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (o
ff
for 0.5 seconds)
Adapter cannot be used
due to high temperature.
(Can be used once the
adapter is cooled)
Lights for 0.1 seconds. Does not light
for 0.1 seconds. (o
ff
for 0.1 seconds)
Overload
Box
Power
suspended
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (o
ff
for 0.5 seconds)
Cannot be used because
the temperature in the box
is too high
(Can be used once the
box is cooled)
00Book̲EC36DA̲NA.indb 21
00Book̲EC36DA̲NA.indb 21
2021/07/08 9:36:17
2021/07/08 9:36:17
