16
1) RAPID STORING OF ELECTRONIC KEYS (Max 4)
The first time the new product is switched on (when the battery connection is restored), the led will remain off for 60 seconds.
During this time it is possible to insert the electronic keys by following the procedure illustrated.
Restore the connection of the battery and insert the first key to be stored into the receptacle within 60 seconds, followed by all
the remaining keys to be stored one after the other.
Successful memorisation of each individual key is confirmed by means of one flash of the led. At the end of this stage, it is possible
to exit or continue with the customisation of the Override code.
For manual setting, proceed according to the following operating procedure:
2) CUSTOMISATION OF THE OVERRIDE CODE
Once the Override code has been customised, it should be written down on the Override-Card supplied and given to
the customer.
To modify the Override code, proceed according to the following operating procedure:
If no electronic keys are to be linked up but you want to customise the Override code, simply skip the point in the procedure
for the memorisation of the keys (Mem= 1Flash) and p15 Dashboard, then proceed with customisation within the
next 10 Secs.
REPEAT FOR ALL THE KEY
TO BE MEMORIZED
+15 ON
MEM=1 FLASH
TIME
OUT
10
SEC.
ON
EXIT
1 BEEP
MAX 60 SEC.
OFF
If no action is taken during the initial 60 seconds period, the new product will automatically await the specific vehicle programming
and the led will always remain off, except for the HPB: this issues a sequence of 3 rapid flashes instead.
EXIT
+15
OFF
X 1
X 2
X 3
X 2
X 1
FLASH
FLASH
FLASH
FLASH
FLASH
+15 OFF
= 1 BEEP
WRITE DOWN
NEW CODE
The HPB control unit is supplied with its Override code already customised: this is noted on the “Factory code”
sticker attached to the control unit itself. This makes it possible to avoid re-programming the code.
ATTACH the “Factory code” sticker onto the OVERRIDE CARD supplied in the box.
= 2 BEEP-
2 BOOP
FLASH
CODE WRITTEN
1
2
3
2
1
+15
ON
2 BEEP
2 BOOP
MAX
10 SEC.
OVERRIDE
CODE
