Meta System BLE42, User And Installation Manual

Page: 7 / 12

1. TECHNICAL SPECIFICATIONS
Power supply: ....................................................................................................................12Vdc/24Vdc
Dimensions: ..............................................................................................................70 x 52 x 22 mm
Consumption: ..................................................................< 5 mAmp (with instrument panel OFF)
Radio frequency (Bluetooth Low Energy): .........................2,402 Ghz ÷ 2,480 GHz (<10mW)
Max immobilizer current at 12V (C/NC): ..............................................................................25 Amp
Max immobilizer current at 24V (C/NC): ................................................................................10 Amp
Operating temperature: ..................................................................................................-30°C /+85°C
2. INPUTS/OUTPUTS
Main Power supply (+30 / GND)
Ignition Key positive input signal (+15)
Input/output for Override LED/Push button
Programmable outputs OUT1/OUT2/OUT3: Active to GND with max load 500mA
ATTENTION: the ID-TAG CARD B9.5 supplied in the
package is not active. To activate the card press
it’s button 5 times. To pair additional cards, use
the PRG007 programmer V3 and the programming
cable 2010337600.
Use only the PRG007 Programmer V3 to select the
various functions of the product.
Software updates for the
PRG007 Programmer V3 and
information about the programmable functions are
available ONLINE in the TECH AREA/VEHICLES AREA of the
www.metasystem.it website.
PROGRAMMING WIRING FOR BLE42
MetaSystem code: 2010337600
PRG007 PROGRAMMER V3
MetaSystem code: ABS15090
3. PRODUCT SET-UP
Fig. 1
4. GENERAL DIAGRAM
Paragraph 3
ID-TAG CARD ACTIVATION
FACTORY SET-UP
Out 1 = Coded output Set-Up
Out 2 = Card depending Set-up
Out 3 = Horn output
BLE42
OUT1
OUT2
OUT3
BLACK
BUTTON/LED
RED
INTERNAL RELAY FOR
STARTER IMMOBILIZER
ORANGE
PROGRAMMABLE
OUTPUTS
POSITIVE
BATTERY (+30)
GROUND KEY IGNITION
(+15)
BLE42 Immobilizer
SN: 123456789012345678
MAC: B12345678901
Pin Code: 23456
PUK Code: 123456
Code: A6015941
MAC
ADDRESS
FACTORY
PIN CODE
B9.5
CARD
7