8
FRONT CAPSULE INSTALLATION
We recommend preventively drilling a centring hole of 2.5mm Ø.
Then, with a suitable 19 mm mill (included in the tool kit for Category
900000359
) drill a hole in the bumper
from the outside in.
For this installation use capsule supports
without locking rings “O”
(see General Installation manual).
The sensors must be painted beforehand, in the same colour as the car.
FRONT SENSOR CABLING
Attach the cables to the crosspiece on the car.
NOTE:
prior to installation it is necessary to remove the sensor’s support tabs as illustrated below.
Summary of Contents for 900000358
