GT-526S Manual Rev F
Page 4
1.
Introduction
The GT-526S is a full
–featured, six-channel, battery operated, handheld particle
counter. The GT-526S has six count channels that can be configured to factory
calibrated standard sizes or user defined custom sizes. It also has two alarm limits and
various communication options. This instrument can store up to 8,000 sample events
including data from the optional temperature / relative humidity probe (PN G3120).
Sample history events can be viewed on the LCD display, printed on the optional printer
(PN G3115) and download to a computer.
2.
Setup
The following sections cover unpacking, layout and performing a test run to verify
operation.
2.1.
Unpacking
When unpacking the GT-526S and accessories, inspect the carton for obvious damage.
If the carton is damaged notify the carrier. Unpack and inspect the contents of the
shipping container. Standard items (included) are shown in Figure 1. Optional
accessories are shown in Figure 2. Contact the supplier if any items are missing.
ATTENTION:
The included USB drivers must be installed before connecting the GT-526S USB port to
your computer. If the supplied drivers are not installed first, Windows may install generic
drivers that are not compatible with this product.
To install USB drivers:
Insert the Comet CD. The install program should run automatically and display the
screen below. If an AutoPlay pop-
up window appears, select “Run AutoRun.exe”.
Finally, select “USB Drivers” to start the install process.
