17
EN ENGLISH
1. Pull up the red button on the safety valve [12] until all excess pressure is released from
the tank. (
Fig. 4)
.
2. Lock the pump handle in place [13].
(Fig. 5)
.
3. Unscrew the pump [2] from the tank [1].
(Fig. 6)
.
4. Empty and rinse the device with clear water.
:LSHRႇWKHGHYLFHZLWKDPRLVWFORWK
6. For drying and storing the device, keep the tank and pump separate in a dry place
protected from sunlight and freezing temperatures.
6SUD\LQJ
Observe the instructions in the section entitled “Safety”.
Operate the device only while it is vertical or suspended upright and nearly vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
+
7RSUHYHQWGULSSLQJKROGWKHVSUD\ZDQGXSZKHQ¿UVWVSUD\LQJDQGDFWLYDWHWKH
VKXWR௺YDOYHXQWLOQRPRUHOLTXLGPL[HGZLWKDLULVHPHUJLQJIURPWKHQR]]OH
,IUHTXLUHGUHVHWWKHORFN>@DQGDFWLYDWHWKHVKXWRႇYDOYH>@
(Fig. 15)
Ź6SUD\LQJPD\QRZEHJLQ
0DNHFHUWDLQWKHRSWLPXPVSUD\LQJSUHVVXUHLVVHWĺ7DEOHRQWKHSLVWRQSUHVVXUH
gauge [16].
7DEOH'HSHQGHQFH6SUD\LQJUDWH±VSUD\LQJSUHVVXUH
+
,IOLTXLGPL[HGZLWKDLUHPHUJHVIURPWKHQR]]OHWKHWDQNLVHPSW\
4. If the spraying pressure decreases more than 0.5 bar
SVL
from the optimum level,
pump some more.
After Usage
Observe the instructions in the section entitled “Safety”.
Never leave liquid in the device.
Collect and dispose of the residual liquid and the tank according to all applicable
laws, requirements and regulations.
Follow the instructions of the spray product manufacturer!
Clean the protective equipment and yourself every time after usage.
6SUD\LQJUDWH
6SUD\LQJSUHVVXUH
ÀDWMHWQR]]OH
hollow cone nozzle
80-01
80-02
1,1 mm
1.5 bar (21.8 psi)
0,29 l/min
0,56 l/min
0,48 l/min
2.0 bar (29.0 psi)
0,32 l/min
0,64 l/min
0,56 l/min
3.0 bar (44 psi)
0,39 l/min
0,78 l/min
0,69 l/min
1. Suspend the device from your shoulder.
)LJ
