Description of all parts of instrument
Transmitter Drawing
1. Transmitter RJ45 interface:
Standard RJ45 network cable interface, used in hunting,
alignment, and network cable detection.
2. Transmitter RJ11 port:
The interface for telephone working state, level detection
and hunting of other metallic conductors.
3. Power switch button:
Press once to power on and press again to power off. The
button indicator is on when powered on, and flashes when undervoltage.
4. Alignment button:
Detect short circuit, open circuit, misalignment, reverse
connection etc. of network cable.
5. Hunting button:
Start/stop button during network cable detection.
6. Red light pen function:
Long press the button ( ) for 2 seconds, the red light is on (only
WT-58DL).
For important safety information, refer to the user manual before using. Misuse
may cause damages to equipment or its parts.
Grounding
Double insulation protection
Comply with European Union instructions
CAT II
Category II measurement is applicable for testing and measuring circuits directly
connected to electricity points of low-voltage power devices (sockets and similar
points).
CAT III
Category III measurement is applicable for testing and measuring circuits
connected to power distribution part of low-voltage power devices of buildings.
CAT IV
Category IV measurement is applicable for testing and measuring circuits
connected to low-voltage power devices of buildings.
