manualshive.com logo in svg

Mestek Space Pak ESP-2430D, Installation, Operation & Maintenance Manual

Share
Download
Mestek Space Pak ESP-2430D Installation, Operation & Maintenance Manual Download Page 3

RETURN AIR DUCT

CLAMP BAND

RETURN AIR BOX

PLENUM DUCT

FAN COIL UNIT

PLENUM CAP

PLENUM TEE

PLENUM TAKEOFF

KWIK CONNECTS

SOUND ATTENUATING TUBING

TERMINATOR PLATES

ORIFICE

RIGID 90° ELBOW

3

INSTALLATION KIT COMPONENTS (SPC-50-5A)

Terminator plates (5)

with clips and screws

S.A. tubing w/ kwik-connects installed (5)

Kwik-connects (10).

Plenum Take-offs (5).

clips and gaskets.

2 ea. 15%, 35% and

50% balancing orifices

RETURN AIR BOX (SPC-1D, 2D, & 3D):

Each includes

filter grill with metal frame, permanent 14" x 25" x 1"
(1D, 2D), 14" x 36" x 1" (3D) filter, and 2 clamp bands.
SPC-1D is for ESP-2430D. SPC-2D is for ESP-3642D
and SPC-3D is for ESP-4860D.

RETURN AIR DUCT (SPC-4,5, & 6)

: Flexible, 6 feet

long with round shape. SPC-4 (15" dia.) for ESP-2430D.
SPC-5 (19" dia.) for ESP-3642D and SPC-6 (24" dia.) is
for ESP-4860D.

PLENUM DUCT (SPC-13-8):

Rigid, 9" I.D., 11" O.D.

fiberglass with aluminum vapor barrier. Each section 
is 6 feet long.

PLENUM TEE  (SPC-14-4A):

Same construction as

duct.

PLENUM ELBOW (SPC-19-4):

Same construction as

duct. 14" Radius. Rigid 90°.

PLENUM END CAP (SPC-16-10):

Insulated metal cap.

SUPPLY TUBING  (SPC-25-100):

Flexible, insulated, 

2" I.D. and 3 

1

⁄

4

" O.D. Each section is 100 feet long.

INSTALLATION KIT (SPC-50-2A & 5A):

Each contains

appropriate amount of sound attenuating (S.A.) tubing
sections, kwik-connects, plenum take-offs, terminator
plates and balancing orifices to complete 2 (SPC-50-2A)
or 5 (SPC-50-5A) room outlets.

ADDITIONAL COMPONENTS (not shown)

WINTER SUPPLY SHUT OFF (SPC-42-10):

To keep

moisture from collecting in ductwork during winter
months.

PLENUM HOLE CUTTER (SPC-71-10):

To cut 2" hole

in plenum for plenum take-off installation.

PLIERS (SPC-72):

To assure full setting of all clips 

(fasteners) in plenum take-off.

FIGURE 1.1: AIR DISTRIBUTION SYSTEM COMPONENTS

Summary of Contents for Space Pak ESP-2430D





















Reviews:

No comments

Brands by name

Popular brands

Load more brands