Quick Start Guide
5
2.2.2 Disassembling the Camera
1. Loosen the 2 screws on the cover by the supplied torx wrench.
2. Remove the dome cover.
3. Insert the optional micro SD card for file storage if necessary ( ).
Figure 2 - 1: Disassembling the Camera
2.2.3 Installing the Camera
1. Attach the mounting template to the wall or ceiling.
2. Drill two holes indicated on the mounting surface and insert the plastic anchors into the holes.
3. Please drill another hole with Ø30mm in diameter as indicated on the mounting template in the wall or
ceiling and pass all the signal cables through the hole.
4. Secure the unit body to the wall or ceiling with the 2 flat head screws (tapping type).
1MP Fixed Lens Model
3MP Fixed Lens Model
3MP Fixed Lens Model Exclusive