4
IR Bullet Camera
INSTRUCTION MANUAL
Specifications
Signal System
NTSC
PAL
Image System
Image Pickup Device
1/3” SONY Exview HAD CCD II
Effective Pixels (HxV)
976 (H) × 494 (V)
976 (H) × 582 (V)
Electric
Scanning System
2:1 Interlace V: 59.94 Hz , H: 15.734KHz
2:1 Interlace V: 50 Hz , H: 15.625 KHz
Sync System
Internal/Linelock
Horizontal Resolution
700 TV lines
Bulit-in Lens
f=3.3mm~12mm,F1.4 DC iris varifocal IR-corrected lens
External adjustments (zoom and focus)
View Angle
Horizontal:89.8°(wide)~23.9°(tele)
Vertical:63.6°(wide)~17.9°(tele)
Gamma Correction
0.45
Minimum Illumination
F1.4 color mode : 0.03 lux@50IRE, 0.015 lux@30IRE,
B/W mode : 0.015 lux@50IRE, 0.0075 lux@30IRE,
IR LED ON:0 lux
S/N Ratio
More than 50dB (AGC off)
Iris Control
DC
Gain Control
On / Off (selectable)
White Balance
ATW/ Manual/ User/ Push/ Push lock
Electric shutter
1/60 sec
1/50 sec
Flickeless
On / Off (selectable)
BLC
Off/ BLC/ HLC (High Light compensation) (selectable)
Day/Night Mode
Mechanical (ICR) D/N(Auto/Color/Forced to BW)
DNR
Yes
Motion Detection
Yes, 4 areas (max)
Privacy Mask
Yes, 8 zones (max)
OSD
Yes
Hight Light Compensation
Yes
ATR*
On / Off (selectable)
Multi Language
English, Japanese, German, French, Russia, Portuguese, Spanish, Simplified Chinese
Video Output
1Vpp composite output, 75 ohm
IR LED
Super power LED 28pcs
IR Wavelength
850nm
IR Distance
35M (115ft)
IR Turn On Status
Under 10 lux by photocell auto controlled
LED Life
More than 10,000 hours(50°C)
Power Supply
Power Requirement
DC 12V & AC 24V ± 10%
Power Consumption
7W (max)
Environment
Operating Temperature
-10°C ~ 50°C
Operating Humidity
90% MAX
Storage Temperature
-20°C ~ 60°C
Storage Humidity
70% MAX
Mechanism
Case Material
Metal
Dimension(ΦxH)
Φ82.9mm x 87mm x 205.5mm (3.26”x3.43”x8.09”)
Weight
610g (1.36 lb) approx.
Construction
Sunshield;Cable management bracket
Compact die-cast aluminum;Tempered Glass
Protection Class
IP66
*Also known as WDR
3.10 NR
NR allows you to configure the DNR
(Digital Noise Reduction) settings to
reduce noise on the screen. In the NR
submenu, you can enable the NR MODE
to the Y (BRIGHT) / C (COLOR), C LEVEL
or Y LEVEL mode. According to your
NR mode, you can adjust Y LEVEL or C
LEVEL as required.
NR MODE
Y/C
Y LEVEL
000
C LEVEL
000
Note:
When the Y/C Level is higher, the
noise in dark areas become lessened.
Also, resolution will become lower. When
it is lower, there are more noise in dark
areas.
3.11 CAMERA ID
CAMERA ID allow you to speicfy camera
ID. Options are OFF (default) and ON. In
the ON submenu, you can add a camera
title up to 26 characters with 2 lines and
also select where the title appears on
the monitor screen.
3.12 SYNC
Set the sync mode as INT (internal, the
default) or LL (line lock) mode. The LL
option only works with AC power.
3.13 LANGUAGE
OSD supports 8 multiple languages.
Options include ENGLISH (default),
JAPANESE, GERMAN, FRENCH,
RUSSIAN, PORTUGUESE, SPANISH and
SIMPLIFIED CHINESE.
3.14 CAMERA RESET
To restore factory defaults, select
CAMERA RESET and then press the
joystick control.
3.15 SAVE ALL
SAVE ALL item allows you to save all
settings and exit the OSD menu.