Messoa NCR366 User Manual Download Page 3

2

WARNING

 

This camera operates at PoE (IEEE 802.3af Class 3) only.

 

Installation and service should be performed only by qualified and experienced technicians and comply with all local 
codes and rules to maintain your warranty.

 

To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.

 

Wipe the camera with a dry soft cloth. For tough stains, slightly apply with diluted neutral detergent and wipe with a dry 
soft cloth.

 

Do not apply benzene or thinner to the camera, which may cause the surface to be melted or lens fogged.  

 

Avoid aligning the lens with extremely bright objects (e.g., light fixtures) for long periods of time.

 

 Although this camera is waterproof and suitable for both indoor and outdoor usages, please do not sink the camera into 
water. Contact your dealer in case of sunk.

 

Avoid operating or storing the camera in the following locations:

• 

Extremely humid, dusty, or hot/cold environments (recommended operating temperature: -40°C to +50°C)

• 

Close to sources of powerful radio or TV transmitters

• 

Close to fluorescent lamps or objects with reflections

• 

Under unstable or flickering light sources

 

WEEE (Waste Electrical and Electronic Equipment).

 Correct disposal of this product (applicable in the 

European Union and other European countries with separate collection systems). This product should be 
disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.

Summary of Contents for NCR366
























































Reviews: