Messoa NCC800, Quick Start Manual

Page: 5 / 80

NCC800/NCC800WL l Quick Start Guide 3
English
Rear View
Reset
DC 12V
4
A
LM-
In +
3
A
LM-
In
-
2
A
LM-Out
1
GND



 




1. Power LED: The LED lights on when power is applied.
2. Video: To perform focus and iris adjustments during the
installation, connect this port to a monitor using provided video
cable.
3. USB Dongle: Optionally connect to a USB Wi-Fi dongle for wireless
function.
4. Ethernet/PoE: Connects to the LAN port of a standard
10Base/100Base-TX device, e.g., hub, switch or router.
5. I/O: Connect your external devices, e.g., sensor and alarms to
the corresponding I/O terminal block. The pins of the I/O terminal
block controls the following signals:
Pin Signal Connection
1 GND Ground (electricity) in electrical circuits.