7
D-WDR:
You can set the D-WDR as OFF, ON or AUTO. If ON is selected, you can adjust the level from 0 to 8.
DEFOG
: You can set the DEFOG as OFF or AUTO. In the AUTO submenu, position, size, and the defog gradation (0
to 2) are configurable.
3.3 Backlight
Set Backlight compensation function. It controls the light level to overcome sever backlight conditions. Available
options include OFF, BLC or HSBLC mode. The default is OFF.
BLC (Backlight Compensation):
–
LEVEL:
Set the gain of BLC as High, Middle, or Low.
–
AREA:
Press the up/down/left/right button to define the BLC position and size. Select RET or AGAIN to go
back the BLC menu or re-define the BLC area.
–
Default:
Restore the BLC settings to the default.
HSBLC:
Select an HSBLC area. Set the DISPLAY status as ON and press the up/down/left/right button to define
the area position and size. Set the BLACK MASK status as ON or OFF. Set the HSBLC LEVEL from 0 to 100.
Select ALL DAY or Night for the HSBLC mode. If Night is selected, you can adjust AGC Level from 0 to 255.
3.4 White BAL
WHITE BALANCE controls color on the screen. Options include
ATW (Auto White Balance), AWC→SET, INDOOR,
OUTDOOR, MANUAL or AWB mode. If MANUAL is selected, you can adjust BLUE and RED value from 0 to 100.
3.5 Day & Night
DAY/NIGHT function allows you to set how the camera switches between color and black and white (B/W) mode.
Options include EXT, AUTO, COLOR and B/W.
EXT:
In the EXT submenu, you can set
D→N
/
N→D
DELAY within the range 0 to 60.
AUTO:
In the AUTO submenu, you can set:
–
D
→N (AGC):
Set the light level at which the camera switches to NIGHT mode. The higher the value, the
darker the lighting must be there before the camera switches.
The value of D→N (AGC) is from 0 to 255.
–
D
→N/ N→D (DELAY):
The Delay has a range from 0 to 60
–
N
→D (AGC):
Set the light level at which the camera switches to DAY mode. The lower the value, the bright er
the lighting must be there before the camera switches.
The value of N→G (AGC) is from 0 to 255.
COLOR:
Force the camera to stay in DAY (COLOR) mode at all times.
B/W:
Force the camera to stay in B/W (NIGHT) mode at all times. The B/W submenu allows you to set BURST
and IR SMART to be ON or OFF. If IR SMART is set as ON, you can adjust the level from 0 to 15 and p
ress the
up/down/left/right button to define the position and size of the area.
MANUAL WB
1. BLUE
----I---- 50
2. RED
----I---- 50
3. RETURN
RET
HSBLC
1. SELECT
AREA1
2. DISPLAY
ON
3. BLACK MASK
ON
4. LEVEL
--I----- 20
5. MODE
NIHGT
6. DEFAULT
7. RETURN
RET
BLC
1. LEVEL
MIDDLE
2. AREA
3. DEFAULT
4. RETURN
RET
