25
Sewing on buttons
Install the darning plate. (1)
Position the work under the foot. Place the button on the
marked position, lower the foot, adjust stitch width to "0" and
sew a few securing stitches. Adjust the stitch width. Turn the
handwheel to check that the needle goes cleanly into the left
hole of the button (adjust the stitch width according to the button),
and sew on the button. Adjust the stitch width to "0" and sew a
few securing stitches.
If a shank is required, place a darning needle on top of the
button and sew. (3) For buttons with 4 holes, sew through the
front two holes first (2), push work forward and then sew
through the back two holes as described. (3)
1
2
3
Stitch width dial
Stitch length dial
Summary of Contents for L9
Page 1: ...For model L9 So Easy So Fun ...
Page 22: ...19 ...
