WMC6300 Client User’s Guide
Installing the Magnetic Antenna Assembly (Optional)
Complete the following procedure to mount the Magnetic Mount Antenna with a
12-foot cable assembly to the rooftop of an automobile.
1.
2.
3.
Locate the Magnetic Antenna and route the 12-foot cable as required
from the location of the Host Computer to the rooftop of the automobile.
Ensure that the Antenna will reach the Host Computer with the provided
cable length.
The base of the antenna contains a powerful magnet that will adequately
secure the antenna to the rooftop. Attach the base of the Magnetic Mount
Antenna to the rooftop of the automobile so that the antenna is in a
vertical orientation.
Warning
FCC regulations require that the antenna’s operational position
must be greater than 20 cm from the human body.
Never use the WMC6300 with the Antenna removed from the rooftop.
Never use the WMC6300 with the Antenna disconnected from the Card.
Insert the Antenna’s Cable Connector into the WMC6300 antenna port as
shown in Figure 15.
Note:
The connector will “snap” into place when
fully inserted.
Figure 15.
Attach Magnetic Mount Antenna to the WMC6300
11
Summary of Contents for MEA WMC6300
Page 3: ...MeshNetworks iv...
Page 5: ...MeshNetworks vi...
