MeshNetworks
2 Installation Requirements
NOTE:
All Intelligent Access Points (IAPs) on the MEA network require a software upgrade to
support VMM Devices.
The MEA Vehicle Mounted Modem External will require the following in a typical installation:
•
12 VDC Power from vehicle or other direct current power supply
•
A Hub or Switch (if more then 1 Ethernet device will be used)
•
Antenna and RF cabling appropriate for use in the 2.4 Ghz band.
2.1
Equipment
A VMM6300 is used similarly to a subscriber device within a MEA network. A VMM6300 will be
used with MeshNetwork’s infrastructure devices: IAP6300 and MWR6300. MeshManager
software is used to manage a VMM in the MEA network.
The following list defines the standard MEA hardware components to install a VMM:
•
VMM Box with N-type Antenna Connector
•
15 feet 18 AWG wire, 12 VDC with 2 amp in line fuse
•
Trunk Mounting Bracket
The Network Operator must supply the following:
•
Mounting Location
•
Power Source (12V DC)
•
Hand tools for bracket installation
Optional Equipment:
•
An Antenna Cable and connector must be ordered separately.
•
Antenna is N-Type connector
•
MeshNetworks SKU: MEA-MM0-VMM
•
Antenna Options are the following:
Manufacturer Part
Number
Gain
Usage
Maxrad
BMMG2400ML195MSMA
0 dBi
Mobile
Antenex TRA24003
3
dBi
Mobile
2
