MEA
EWR
User’s
Guide
3.2 External Device Provisioning
Figure 3-18. External Device Provisioning Table
The
External Device Provisioning
table is used to configure addresses for the attached nodes
on the local ethernet segment. Up to three addresses are provisioned.
The
Enable
checkbox indicates this row contains a valid address. Any address can be
disabled by clearing the checkbox. The pull-down menu options indicate whether this address
will be offered via the local DHCP service (“Local-DHCP”) or not (“Statically-Provisioned”).
The
Statically-Provisioned
setting is used to support devices that do not use DHCP to acquire
an address.
The MAC address field is used for
Local-DHCP
addresses, so that the IP address can be
reserved for a specific device. The
reserved
checkbox must be marked for this kind of IP
address reservation. The
Status
field indicates whether the provisioned IP address was
detected (via a ping) when the web page was brought up.
25
