MeshNetworks
3 1/2 x 1/4 inch bolt
1/4 Flat Washer
1/4 Flat Washer
1/4 Lock Washer
1/4 Hex Nut
Note: All Hardware is Stainless Steel
Figure 3-20. C-Clamp Bracket Assembly
3.
4.
Position the bracket in the desired location and securely tighten the two bracket bolts.
If required, loosen the Pivot Bolt and the Angle Locking Bolt (
) so that the
antenna connector is positioned vertically.
5.
6.
Tighten the Angle Locking Bolt using a #1 Phillips screwdriver.
Ensure that the antenna connector is still vertical and tighten the Pivot Bolt using a 7/16-
inch open-end wrench or socket wrench.
28