MSL-500-
P
ELECTRONIC LOCK INSTRUCTIONS
|
PG.4
if the lock responds
[See Wrong Try Penalty; bottom of page]
Replace the existing batteries with new ones
[See Changing Your Batteries; pg. 7]
The Lock Is Responding but Does Not Unlock
Make sure you are getting a valid response
Make sure you get a signal with every key stroke
Make sure you are not in Time Delay mode
[See How To Open In Time Delay; pg. 7]
Replace the existing batteries with new ones
[See Changing Your Batteries; pg. 7]
If the lock still does not open, contact M
E S A
S
A F E
C
O M PA NY
Technical Support
:
888.381.8514
[Monday thru Friday 7AM - 4PM/PST ]
SAFE OPERATION & PROGRAMMING
Your
Master Code
is factory set to :
NOTE :
The
Master Code
should always be held by the owner of the safe.
You will not be able to activate/delete users, set up single/dual entry and
set up time delay without the
Master Code
.
HOW TO OPEN YOUR SAFE
Single User Mode
[Default Setting]
1
Input :
Code
-
#
[light stays green for
5 seconds]
2
Turn the handle clockwise before the green light disappears
Example :
Invalid Code:
Red light
along with
5
‘
Beeps
’
Dual User Mode
[Please refer to Setting Single User & Dual User Mode; pg. 6]
1
Input :
1
st
Code
-
#
[lock will ‘
Beep
’
2 times]
2
Input :
2
nd
Code
-
#
[light stays green for
5 seconds]
3
Turn the handle clockwise before the green light disappears
Example :
1
st
Code
-
#
-
2
nd
Code
-
#
Invalid Code:
Red light
along with
5
‘
Beeps
’
Wrong Tr y Penalty
If
4 wrong codes
are entered, the keypad will not accept any codes for
5
minutes
. If you press any key during this penalty, the
orange
light will turn on
for approximately
2
seconds
and you will hear a ‘
Beep
’.
* * * * * * * * * * *
* * * * * * * * * * * * *
