SETUP:
There are only 2 option jumpers on the 4I67, W1 and W2.
These select the PC/104-PLUS "SLOT" number that the 4I67
occupies.
W1
W2
PC/104-PLUS SLOT
DOWN
DOWN
0
DOWN
UP
1
UP
DOWN
2
UP
UP
3 (Only newer CPUs support slot 3)
The 4I67 has two independent local 3.3V power regulators
(U6,U7), one for each Mini-PCI card. Maximum current supplied by
the regulator is 1A per Mini-PCI card.
The 4I67 has 4 status LEDS and a connector (P1) to allow remote
LEDS to be connected. P1 is a 10 pin 2mm connector. P1 pin-out is
as follows:
PIN
1
2
Green0-
3
4
Yellow0-
5
6
Green1-
7
8
Yellow1-
9
GND
10
3.3V
External LEDS connected to P1 must have series current limiting
resistors.
