1
ALL MODELS
Take horizontal frame
complete with pedal
[A]
and fix
wooden sides
[B]
on each side with one
1/4"x 2" carriage bolt/nut
[
position
9]
ensuring the logo faces outward.
Do not tighten.
2
ALL MODELS
Slide vertical frame
[D]
between the two wooden sides
[B]
at the back, making sure the 1"
square tube with eyehooks faces out
and the holes for the chair seat face up.
Match the three holes on each side of
the wooden sides
[B]
with vertical frame
[D]
and fix six 1/4"x 2" carriage
bolts/nuts
[
positions
1,2,3]
.
Do not tighten.
3
ALL MODELS
Fix middle support
[E]
between the two wooden sides,
using two 1/4"x 1-1/2" hex bolts with
washers on outside
[
position
4]
, making
sure holes for chair seat face up.
4
a
MODELS WITHOUT HANDLES
Fix wooden sides to horizontal
frame with 1/4"x 2" carriage bolts/nuts
[
position
7,8]
. Fix two 1/4"x 1-1/2" hex
bolts/nuts
[
position
5,6]
with washers
in remaining holes on wooden sides.
Tighten all hardware.
4
b
MODELS WITH HANDLES
Fix bottom end of chair
handle receptacles
[C]
to wooden
sides and horizontal frame using two
1/4"x 2-1/4" hex bolts/nuts with
washers only on outside
[
position
7,8]
.
Fix top end of chair handle receptacles
to wooden sides using two 1/4"x 1-1/2"
hex bolts/nuts with washers on both
sides
[
position
5,6]
. Tighten all hardware.
5
ALL MODELS
Place chair seat
[H]
on top of middle support
[E]
and
vertical frame
[D]
. Align evenly along
wooden sides and fix four 1/4"x 2"
hex bolts with washers
[10,11,12,13]
,
from bottom to hold chair seat on frame.
Tighten all hardware.
6
MODELS WITH HANDLES
Assemble chair handles
[F]
and chair handle chrome extensions
[G]
each with two 3/8"x 3/4"
hex bolts
[14,15]
with washers
and tighten.
Note: Chair handles and chrome
extensions come as right and left.
7
MODELS WITH HANDLES
Loosen
round stud knob
[17]
. Pull pop-up
pin
[16]
and insert complete chair
handle
[F,G]
into chair handle receptacle
[C].
Ensure bolt head at
[15]
faces out.
Release pop-up pin at desired height
and tighten round stud knob
[17]
to
secure handle in receptacle. Adjust
handle height following same procedure.
Note: To prevent damage to vinyl on chair
seat make sure bolt head at position #15
faces away [out] from the chair.
8
ALL MODELS
Attach all springs;
heavy springs
[18]
to inner
eyehooks and light springs
[19]
to outer eyehooks.
Note: Attach springs to hooks on pedal
first, then to hooks on vertical frame.
9
SPLIT PEDALS
To split pedals:
Loosen both star knobs
[21]
and lift open side of lock
[20]
from
star knob and rotate so it is completely
under one pedal. Tighten both
star knobs.
To join pedals:
Loosen both star
knobs
[21]
and rotate lock
[20]
to
hook onto metal shaft of star knob.
Tighten both star knobs.
S TA B I L I T Y C H A I R
A S S E M B LY I N S T R U C T I O N S
IMPORTANT:
DO NOT TIGHTEN ANY BOLTS OR SCREWS PRIOR TO FINISHING COMPLETE ASSEMBLY.
FOR SAFETY REASONS:
DO NOT LIFT CHAIR FROM CHAIR SEAT, GRIP METAL FRAME INSTEAD.
S P E C I A L
F E AT U R E S
A L S O
AVA I L A B L E
adjust spring tension with
easy
hook-on system
lock
split-pedal
together for use
as a single pedal
shop
online
www
.merrithew
.com
D
20
19
18
21
S TA B I L I T Y C H A I R D V D S
Enhance your performance
with any or all of our videos
that coach you through each
level of core stability training.
WA L L C H A RT
A great way to support client
instruction and brighten up
your studio or gym.
WARNING:
As with any athletic activity, the use of exercise equipment involves risk of injury, damage and/or death. By choosing to use STOTT PILATES equipment,
you and/or your clients/patients assume responsibility for that risk, not the people who sold you the equipment, distribute it and/or manufacture it.
To prevent unsafe or improper use of STOTT PILATES equipment, please read all assembly and safety information thoroughly and follow the directions carefully. Contact the
manufacturer if you have any questions or concerns.
Please also ensure that you and your clients/patients have received proper instruction regarding the correct and safe use
of STOTT PILATES equipment.
Like any mechanical device, Pilates equipment and its components are subject to wear and stress. Proper maintenance and timely replacement of your equipment or component
parts is your responsibility as it helps reduce the risk of injury. As it is impossible to predict every situation and condition that will occur while using STOTT PILATES equipment,
Merrithew Health and Fitness
™
makes no representation about the safe use of its equipment under all conditions.
C O U R S E M A N U A L
Details the full Stability Chair
repertoire including exercise
descriptions and photographs.
Call or email today for
more information.
