Rotational Diskboard Owner’s Manual
4
1.
Lower the footbar by adjusting the
swing arm of the Reformer to cradle
position #4.
Note:
Shown on the SPX Max Reformer
2.
Slide the rods of the Rotational
Diskboard Frame completely into
the receptacles in the wooden
standing platform.
INSTALLATION
Inserting the Rotational Diskboard
3.
Tighten both star knobs to ensure the
Jumpboard is securely in place.
The Rotational Diskboard features both horizontal and vertical
mounting slots to accommodate a variety of foot placement positions
and is easily adjusted.
1.
Loosen star knob.
2.
Slide the Rotational Disk within the slot to the desired position.
3.
Tighten star knob to secure.
Rotational Diskboard Set-Up