Wire
LED Light Kit
Light Plate
Lamp Shade
Bolt
8
LIGHT PLATE & SHADE INSTALLATION
Feed the wire connector through the
middle of the light plate. Install the
light plate on the motor assembly with
the provided bolts.
Connect the LED light kit to the wire
connector. Attach the LED light kit to
the light plate using its magnetic
bolts.
Install the glass lamp shade onto the
light plate, turning it into place.
Ensure it is firmly connected to avoid
loosening during use.
COLOR TEMPERATURE ADJUSTMENT
The LED light has 3 different color setting: Warm White (3000K), Daylight (4500K), and
Cool White (6000K). To adjust the light settings,
1. Press
LIGHT
on the remote control to turn on the LED light.
2. Press and hold the the
LIGHT
button until the LED light turns off.
3. Press and hold the the
LIGHT
button until the LED light turns on again with the next
color temperature in order.
Repeat these steps to cycle through the 3 color temperatures.
Magnetic Bolts
