manualshive.com logo in svg

Mermaid CONDENSATOR, Installation Maintenance & Troubleshooting Manuallines

Share
Download
Mermaid CONDENSATOR Installation Maintenance & Troubleshooting Manuallines Download Page 6

 
 
 
 
 
 
Now lets review the following diagram of the Condensator: 
 

 

 

 
Nipple Body
 
 
O - Ring 
 
 
 
 
Core 
 
O - Ring 

THE  

CONDENSATOR 

 

 

 
 
 
 

 

Condensator                             Water          Washer 
      Body                                  Nozzle                      

 
 
 
 
 
We recommend that you put about 8 oz. of clean water in the condensation pan at this 
point.  Insure you have opened the seacock, then turn the air conditioner circuit breaker 
on and set your thermostat so the air conditioner will turn on.  Verify that the 
Condensator is working properly, that you have reassembled the check valve assembly 
correctly, and that the Condensator is not allowing water to backflow to the condensation 
pan.  Go to your daytimer or calendar, and go forward and mark the point where you will 
repeat this maintenance procedure. 

Summary of Contents for CONDENSATOR








Reviews:

No comments

Brands by name

Popular brands

Load more brands