MENU CODES:
HC H=Humidification C=Dehumidification.
d Humidity on/off range (1% to 30%). Preset is 5%.
LS Minimum humidity set limit (1% to 99%).
HS Maximum humidity set limit (1% to 99%).
CA Calibration (-20% to 20%). Preset is 0%.
P7 Delay Time (1 to 10 minutes). Preset is 1 minute.
FAULT MESSAGES:
EEE means a sensor has become disconnected or is faulty.
LLL means humidity is below 1%.
HHH means humidity is above 99%.
FUSE:
The fuse housing is located on the front of the unit. To open, push in and
turn counterclockwise. Replace the fuse with a similar fuse. The standard DP
is equipped with a 10 AMP fuse. The dehumidifier – XL is equipped with a
30 AMP fuse.
Replacing your fuse with a higher load fuse may cause a dangerous
condition and will void the 5-year warranty!
