7
10
11
A
B
C
K165
Inside
H
2
O
H
2
O
A. Slide the clip over the fixed panel on both the top and bottom.
B. Starting at the bottom use the tool provided to insert the wedge gasket between the glass and the
profile. Keep the flat side to the glass and the ridged side to the profile.
Top Tip ! Dampen the seal with water to help slide into place.
C. Remove the bottom PVC installation tool by releasing the side closest to the bottom first, then lift out
from the frame.
Tighten the grub screws until they are flush with the 'adjusting block'.
Adjusting block
K143
/K144
