5.Silicone the bottom of the pivot part.
FIG 5
FIG 6
6.Insert the screen into the wall profile. Ensure the bottom seal
on the moving panel A is parallel to the top surface of the bath.
7
.Insert the bottom seal into the Frame, So it
sits against the bottom bracket. Ensure the fin
on the bottom seal is to the inside.
FIG7.
FIG 7
Inside
8.
FIG 8
Drill 3 holes through the wall profile and fixed panel using a
3mmsteel drill bit. Using the Screws A2401201, screw cover
caps SP0A308 and screw cover caps clips SP0A309, fix the hinge
upright to the wall profile in 3 places.
Fig 6.
