1.Position the wall profile so the seal on the
moving panel sits on the inside edge of the
bath.
FIG 1.
2. Plumb the wall profiles using the vertical element of
the spirit level. Mark 3 holes, drill with 6mm masonry
bit and fit wall plugs. Using the 3 screw fix wall profile
to wall.
FIG 2.
FIG 1
FIG 2
screen
inside
bath edge
FIG 3
LH
RH
3. Ensure rising butt (
FIG 3
/C) is to the bottom ,if not reverse by loosening
A
C
B
D
F
E
screws as in A. Swing screen around and tighten screws as in FIG 3.
